Dosimetric analysis:
The conformity and homogeneity of the dose distribution in the target is almost the same for both methods. Outside PTV dose decreases faster with ncVMAT (an average difference between methods is 0.41). The maximum lens dose is best reduced when planning ncVMAT (difference is about 0.45 Gy). The dose to the hippocampus is reduced much better when planning HyperArc (Dmax difference 0.8 Gy). Equipment wear, proportional to the number of monitor units, is the same for both methods. The time of plan calculation and optimization when using the HyperArc technology increases by 9.8 minutes.
Gamma analysis:
At threshold TH10% ncVMAT gamma passing rate GPR<95% for 2%/2mm and 3%/2mm are 91.7 and 94.4, respectively. Verification at ТН10% GPR> 95%: HyperArc passes 2%/2mm and 3%/2mm, and ncVMAT passes 2%/3mm and 3%/3mm.
Analysis with Local and Global normalization:
For Hyperarc with Global normalization, GPR regardless of the comparison criteria (2%/2mm - 3%/3mm, TH5-20%) is 100%. For ncVMAT with Global normalization, GPR is 99.7% on average.
Analysis with high detectors density:
On average, ncVMAT GPR increases by 0.7%: at thresholds ТН5-10% (2%/2mm - 3%/3mm) and ТН5-20% (2%/2mm). With HyperArc, the difference is only 0.1%.
The methods satisfy the protocols conditions:
HyperArc: TG-119 (3%, 3mm, TH10%, Global), TG-218 (3%, 2mm, TH10%, Global ), TG-244 (2%, 2mm, TH10%, Local).
ncVMAT: TG-119 (3%, 3mm, TH10%, Global), TG-218 (3%, 2mm, TH10%, Global).